|
|
|
|
|
|
|
|
|
|
|
|
|
|
Used on Croft and Keller sliding screen doors. 1/4 in W x 3/8 in Dia flat nylon ball bearing wheel with 3/8 in threaded hex hub. Includes 2 rollers and 2 fasteners.
|
Plastic roller with narrow center groove 7/32 in W nylon wheel, concave edge. Includes a 8-32 x 3/8 in machine screw with binder post nut. Fits on air control doors.
|
Bent spring design used by Academy Mfg. and others. Center grooved 5/16 in W wheel, 2-1/4 in L x 5/16 in W flat high-tension heat-treated steel spring and #8 x 3/8 in Phillips sheet metal screw.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Used by metal industries. Center grooved, 1/4 in W, roller. 1-3/4 in L, high-tension, heat-treated steel spring. Includes #8 x 3/8 in Phillips sheet metal screw.
|
Consists of 1/4 in W center groove wheel. Heat-treated, high-tension adjustable steel M-spring. Used by several patio door manufacturers.
|
1/4 in W center groove nylon wheel, high-tension 2-1/2 in L heat-treated steel spring and #8 x 3/8 in Phillips pan head sheet metal screw.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Used as top and bottom roller. Plastic wheel with center groove. 1-7/8 in L housing. Heat-treated, high-tension steel spring and #8-32 x 1-1/4 in Phillips pan head screw.
|
Plastic center grooved wheel with steel housing, high-tension steel spring. Fits on Columbia Uni-fit doors. Contents: 2 roller assemblies.
|
Used as top and bottom roller by several patio door manufacturers. Consists of 1/4 in W center groove nylon wheel, 2 in L x 3/8 in W steel housing, high-tension heat-treated steel spring.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Consists of 1/4 in W center groove wheel. Heat-treated, high-tension adjustable steel M-spring. Used by several patio door manufacturers.
|
Used by several patio door manufacturers. Consists of 1/4 in W center groove wheel, high-tension heat-treated steel v-spring (2 in L before and 2 in L after bend).
|
For sliding glass doors. Center grooved, 5/16 in W steel ball bearing roller and steel inner race with 1/4 in - 20 x 3/4 in carriage bolt and 1/4 in - 20 hex nut.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Used by metal industries. Center grooved, 1/4 in W, roller. 1-3/4 in L, high-tension, heat-treated steel spring. Includes #8 x 3/8 in Phillips sheet metal screw.
|
Used on Peachtree sliding screen doors. All nylon roller assembly consists of center-grooved wheel and 1-5/32 in L x 13/16 in H x 7/16 in D housing. Includes #8 x 3/8 in Phillips pan head screws.
|
Used on Peachtree patio doors. Steel ball bearing roller, adjustable steel housing 2-1/4 in L x 1-9/16 in H x 17/8 in W. Contents: 1 roller assembly.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Used by Crossly and other patio door manufacturers. Steel ball bearing roller and adjustable 2-5/16 in L x 1-1/8 in H x 11/16 to 9/16 in D die-cast housing assembly with 15/16 in flare width.
|
Nylon outer housing, aluminum inner housing with center grooved nylon wheel with adjustment cam. Contents: 2 roller assemblies, installation screws.
|
Used by Air Control, Howmet, Krestmark and many other patio door manufacturers. Steel ball bearing roller and adjustable 2-5/8 in L x 1-3/8 in H x 3/4 in D steel housing assembly with machine threaded holes (10-32 top and 1/4-20 side) for installation.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Cylinder Lock, 1-1/4 in, 5-pin tumbler lock with 2 keys, hardened break-away tailpiece. Used to keylock most surface mount handle sets. Keyway is compatible with Weiser, Kwikset & Weslock.
|
Steel ball bearing roller and adjustable steel housing assembly. Fits on Nu-Air, Bennings, Scotty and many other patio door manufacturers.
|
PL 15576 is a 96 in stainless steel track cap used to repair damaged patio or wardrobe door tracks. It can be cut to size. After the old track is prepared by grinding any spots that are wider than the original track width and cleaning it, the new track is simply pressed onto the old track after squirting a thin bead of silicone glue in the replacement track. Using a rubber mallet and a block of wood, the replacement track is snapped down over the old track.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2-roller tandem design. 6-1/4 in L x 1-3/16 in H x 11/16 in D adjustable steel housing with 2 steel ball bearing rollers.
|
Steel glass door roller. Housing width: 3/4 in. Roller edge type: Concave. Includes 1 roller assembly.
|
Tandem steel ball bearing roller; adjustable; steel housing assembly. Housing width: 3/4 in. Roller edge type: Concave. Contents: 1 roller assembly.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Steel housing and hook, round end face plate. Hook position is adjustable, fits on W&F. Hole center of 3-11/16 in.
|
Mortise Lock for Sliding Patio Doors, 45 deg lever slot. Adaptor faceplate allows for use on wood and vinyl patio doors. 4-5/8 in hole center (hole to hole). 45 deg keyway.
|
1-1/4 in tandem steel ball bearing rollers; adjustable steel housing; dimensions: thickness 11/16 in; length 3-1/8 in; height 1-1/32 in. Roller edge type: Concave. 2 tandem wheels in roller assembly.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Steel mortise latch designed for wood stiles, adjustable bolt throw. Vertical keyway, round faceplate, slanted housing corners. 1000 lb strength.
|
Die-cast outside pull, inside pull with wood handle, die-cast thumb turns with steel latch activator. Includes one inside pull with thumb latch, one outside pull and installation fasteners.
|
Die-cast construction fits most popular flush lock cutouts. Comes complete with keyed cylinder lock; reversible for left or right hand; complete with 4 different hood lengths. Includes 1 inside latch with deluxe wood pull, 1 outside pull, 1 keeper, installation fasteners, 4 hook assortment and 1 locking cylinder with 2 keys.
|
|
|
