|
|
|
|
|
|
|
|
|
|
|
|
|
|
Commercial Magnum? brings an extra measure of assurance for perimeter, equipment and vehicle security. To withstand the elements, Commercial Magnum? is made with a stainless steel cover and a chrome shackle. These durable padlocks extend use in any environment. The octagonal boron carbide shackle is 50% harder than the hardened steel used on typical padlocks - which increases resistance to cutting and sawing. The dual ball locking mechanism improves resistance to pry and impact attacks.
|
The Master Lock No. 40DPF discus padlock features a 1-9/16 in wide stainless steel body for maximum strength, reliability and corrosion resistance. The fully shrouded design minimizes shackle exposure and protects against bolt cutter attacks. The 3/8 in Dia shackle is 5/8 in long and made of hardened steel, offering extra resistance to cutting and sawing. The 4-pin cylinder prevents picking and the dual locking levers provide resistance against prying and hammering. The limited lifetime warranty provides peace of mind from a brand you can trust.
|
The Master Lock #570DLH solid body padlock features a 1-1/2 in (38 mm) W solid aluminum body that is lightweight, durable and resists rust and corrosion. The 9/32 in (7 mm) Dia shackle is 2 in (51 mm) L and made of hardened steel, offering extra resistance to cutting and sawing. The 5-pin cylinder prevents picking and the dual locking ball bearings provide maximum protection against prying and hammering. The limited lifetime warranty provides peace of mind from a brand you can trust.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Master Lock Padlock, Shackle Diameter: 3/8 in, Shackle Height: 1-1/2 in, Shackle Width: 0.951 in, Shackle Material: Boron Carbide, Shackle Clearance: 1-1/2 in, Lock Type: Dual Ball Bearing, Key Type: Alike, Number of Pins: 4, Body Material: Steel, Zinc, Silver, Resists: Weather
|
Commercial Magnum? brings an extra measure of assurance for perimeter, equipment and vehicle security. To withstand the elements, Commercial Magnum? is made with a stainless steel cover and a chrome shackle. These durable padlocks extend use in any environment. The octagonal boron carbide shackle is 50% harder than the hardened steel used on typical padlocks - which increases resistance to cutting and sawing. The dual ball locking mechanism improves resistance to pry and impact attacks.
|
The Master Lock Magnum? No. M40XKAD discus padlock features a 2-3/4 in wide stainless steel body for maximum strength, reliability and corrosion resistance. The fully shrouded design minimizes shackle exposure and protects against bolt cutter attacks. The 3/8 in Dia octagonal shackle is 5/8 in long and made of tough-cut? boron-carbide, 50% harder than hardened steel, offering maximum resistance to cutting and sawing. The 4-pin cylinder prevents picking and the dual locking ball bearings provide maximum resistance against prying and hammering. The covered keyway offers maximum weather protection and reinforced body bumper protects against scratches. The lifetime assurance provides peace of mind from a brand you can trust.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Commercial Magnum? brings an extra measure of assurance for perimeter, equipment and vehicle security. To withstand the elements, Commercial Magnum? is made with a stainless steel cover and a chrome shackle. These durable padlocks extend use in any environment. The octagonal boron carbide shackle is 50% harder than the hardened steel used on typical padlocks - which increases resistance to cutting and sawing. The dual ball locking mechanism improves resistance to pry and impact attacks.
|
The American Lock No. A5200 solid steel padlock features a 1-3/4 in wide hardened, chrome-plated solid steel body to resist cutting, sawing and corrosion and a 1-1/8 in tall, 5/16 in Dia hardened boron alloy shackle for great cut resistance. Easy to service with a 5-pin APTC12 rekeyable cylinder, this padlock is ideal for securing gates, sheds, truck or van doors and industrial machinery.
|
Commercial Magnum? brings an extra measure of assurance for perimeter, equipment and vehicle security. To withstand the elements, Commercial Magnum? is made with a stainless steel cover and a chrome shackle. These durable padlocks extend use in any environment. The octagonal boron carbide shackle is 50% harder than the hardened steel used on typical padlocks - which increases resistance to cutting and sawing. The dual ball locking mechanism improves resistance to pry and impact attacks.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Commercial Magnum? brings an extra measure of assurance for perimeter, equipment and vehicle security. To withstand the elements, Commercial Magnum? is made with a stainless steel cover and a chrome shackle. These durable padlocks extend use in any environment. The octagonal boron carbide shackle is 50% harder than the hardened steel used on typical padlocks - which increases resistance to cutting and sawing. The dual ball locking mechanism improves resistance to pry and impact attacks.
|
Commercial Magnum? brings an extra measure of assurance for perimeter, equipment and vehicle security. To withstand the elements, Commercial Magnum? is made with a stainless steel cover and a chrome shackle. These durable padlocks extend use in any environment. The octagonal boron carbide shackle is 50% harder than the hardened steel used on typical padlocks - which increases resistance to cutting and sawing. The dual ball locking mechanism improves resistance to pry and impact attacks.
|
The American Lock No. A800 hidden shackle padlock hasp features a 9-1/16 in long steel body for maximum strength and durability and accepts shackles with diameters up to 9/16 in. Ideal to secure sliding and swinging doors on garages, storage buildings, vehicles and vending machines, this hasp can be used with American Lock Nos. A2500, A2010, A2001 and A2000 hidden shackle padlocks for maximum security.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
The Master Lock No. 930DPF solid body padlock features a 2-1/2 in wide solid steel lock body that is strong, durable and resists corrosion. The 7/16 in Dia shackle is 1-1/8 in long and made of hardened boron alloy, offering maximum resistance to cutting and sawing. The 5-pin cylinder prevents picking and can be removed to rekey the lock. The limited lifetime warranty provides peace of mind from a brand you can trust.
|
The American Lock No. A702 solid steel padlock features a 2-1/2 in wide case hardened, zinc-plated solid steel body with a 1-1/16 in tall, 7/16 in Dia hardened boron alloy shackle for great cut resistance. A dual ball bearing locking mechanism resists pulling and prying and a 5-pin APTC12 rekeyable cylinder with serrated pins is virtually impossible to pick.
|
The American Lock No. A702KA solid steel padlock, keyed alike multiple locks open with the same key features a 2-1/2 in wide case hardened, zinc-plated solid steel body with a 1-1/16 in tall, 7/16 in Dia hardened boron alloy shackle for great cut resistance. A dual ball bearing locking mechanism resists pulling and prying and a 5-pin APTC12 rekeyable cylinder with serrated pins is virtually impossible to pick.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Commercial Magnum? brings an extra measure of assurance for perimeter, equipment and vehicle security. To withstand the elements, Commercial Magnum? is made with a stainless steel cover and a chrome shackle. These durable padlocks extend use in any environment. The octagonal boron carbide shackle is 50% harder than the hardened steel used on typical padlocks - which increases resistance to cutting and sawing. The dual ball locking mechanism improves resistance to pry and impact attacks.
|
The American Lock A703KA solid steel padlock, keyed alike multiple locks open with the same key features a 2-1/2 in wide case hardened, zinc-plated solid steel body with a 2 in tall, 7/16 in Dia hardened boron alloy shackle for great cut resistance. A dual ball bearing locking mechanism resists pulling and prying. For extra security, the 5-pin APTC12 rekeyable cylinder with serrated pins is virtually impossible to pick.
|
The Master Lock No. 930DLHPF solid body padlock features a 2-1/2 in wide solid steel lock body that is strong, durable and resists corrosion. The 7/16 in Dia shackle is 2 in long and made of hardened boron alloy, offering maximum resistance to cutting and sawing. The 5-pin cylinder prevents picking and can be removed to rekey the lock. The limited lifetime warranty provides peace of mind from a brand you can trust.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
The American Lock No. A700 solid steel padlock features a 2-1/2 in wide case hardened solid steel body with a 1-1/16 in tall, 7/16 in Dia hardened boron alloy shackle for great cut resistance. A dual ball bearing locking mechanism resists pulling and prying and a 5-pin APTC12 rekeyable cylinder with serrated pins is virtually impossible to pick.
|
The American Lock No. A700KA solid steel padlock, keyed alike multiple locks open with the same key features a 2-1/2 in wide case hardened solid steel body with a 1-1/16 in tall, 7/16 in Dia hardened boron alloy shackle for great cut resistance. A dual ball bearing locking mechanism resists pulling and prying and a 5-pin APTC12 rekeyable cylinder with serrated pins is virtually impossible to pick.
|
The Master Lock Magnum No.M40XT discus padlocks feature a 2-3/4 in wide stainless steel body for maximum strength, reliability and corrosion resistance. The fully shrouded design minimizes shackle exposure and protects against bolt cutter attacks. The 3/8 in diameter octagonal shackle is 5/8 in long and made of Tough-Cut boron-carbide, 50% harder than hardened steel, offering maximum resistance to cutting and sawing. The four-pin cylinder prevents picking and the dual locking ball bearings provide maximum resistance against prying and hammering. The covered keyway offers maximum weather protection and reinforced body bumper protects against scratches. The lifetime guarantee provides peace of mind from a brand you can trust.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2-1/2 in wide, 1-1/8 in thick, case hardened, with a 7/16 in thick boron shackle. 5-pin cylinder. Includes 2 keys. 15/16 in horizontal shackle clearance.
|
The American Lock No. A701KA solid steel padlock, keyed alike multiple locks open with the same key - features a 2-1/2 in wide case hardened solid steel body with a 2 in tall, 7/16 in Dia hardened boron alloy shackle for great cut resistance. A dual ball bearing locking mechanism resists pulling and prying and a 5-pin APTC12 rekeyable cylinder with serrated pins is virtually impossible to pick.
|
Commercial Magnum? brings an extra measure of assurance for perimeter, equipment and vehicle security. To withstand the elements, Commercial Magnum? is made with a stainless steel cover and a chrome shackle. These durable padlocks extend use in any environment. The octagonal boron carbide shackle is 50% harder than the hardened steel used on typical padlocks - which increases resistance to cutting and sawing. The dual ball locking mechanism improves resistance to pry and impact attacks.
|
|
|
|
|
|
|
|
|
|
|
|
|
The Master Lock Magnum? No. M50XD Discus Padlock features a 3-1/8 in wide stainless steel body for maximum strength, reliability and corrosion resistance. The fully shrouded design minimizes shackle exposure and protects against bolt cutter attacks. The 7/16 in Dia octagonal shackle is 11/16 in long and made of Tough-Cut? boron-carbide, 50% harder than hardened steel, offering maximum resistance to cutting and sawing. The 4-pin cylinder prevents picking and the dual locking ball bearings provide maximum resistance against prying and hammering. The covered keyway offers maximum weather protection and reinforced body bumper protects against scratches. The lifetime assurance provides peace of mind from a brand you can trust.
|
|
|
