|
|
|
|
|
|
|
|
|
|
|
Cloverdale Replacement Single Bevel Edge Trimmer Blade, Dimensions: 1/64 x 3/4 x 1-3/4 in, Suitable for: 33437 Edge Trimmer
|
Appearance-grade, southern yellow pine. MCA treatment, above ground contact.
|
No mitering decorative blocks. Installs with a hammer and finishing nails. Pine wood.
|
|
|
|
|
|
|
|
|
|
|
|
|
No mitering decorative blocks. Installs with a hammer and finishing nails. Pine wood.
|
No mitering decorative blocks. Installs with a hammer and finishing nails. Pine wood.
|
No mitering decorative blocks. Installs with a hammer and finishing nails. Pine wood.
|
|
|
|
|
|
|
|
|
|
|
|
|
WallTuf Inside Corner Moulding, Inside Corner, Vinyl, White, 8 ft L
|
WallTuf Divider Moulding, White, Vinyl, 8 ft Actual Length
|
WallTuf End Cap Moulding, Vinyl, White, 8 ft L, Suitable for: WallTuf Liner Panels
|
|
|
|
|
|
|
|
|
|
|
|
|
Palclad wall and ceiling liner panels are ideally suited for both industrial and residential interior applications. These waterproof panels are lightweight, have an attractive surface texture, absorb scratches and clean up very easily. Palclad is a cost-effective alternative to traditional FRP panels. Manufactured from 100% recycled content.
|
No mitering decorative blocks. Installs with a hammer and finishing nails. Pine wood.
|
No mitering decorative blocks. Installs with a hammer and finishing nails. Pine wood.
|
|
|
|
|
|
|
|
|
|
|
|
|
No mitering decorative blocks. Installs with a hammer and finishing nails. Pine wood.
|
ALEXANDRIA Moulding Common Board, 1 in Nominal Thickness, 4 in Width, 4 ft Length
|
Used under Sun-n-Rain panels on each cross support or purlin. Provides support for fasteners when attaching panels to framing. Custom profile matches pitch and depth of panel corrugation.
|
|
|
|
|
|
|
|
|
|
|
|
|
Used under Suntuf? panels on each cross support or purlin. Provides support for fasteners when attaching panels to framing. Custom profile matches pitch and depth of panel corrugation.
|
Used under Palruf? or Suntop panels on each cross support or purlin. Provides support for fasteners when attaching panels to framing. Custom profile matches pitch and depth of panel corrugation.
|
Use under Palram's corrugated panels to close off vertical edges for a finished look.
|
|
|
|
|
|
|
|
|
|
|
|
|
Woodtite 1 in screw (sku 940.4302) with EPDM washer is used to fasten PVC, Sun-n-Rain and Palruf or Polycarbonate, Suntop and Suntuf, corrugated panels in a siding or cladding application and Woodtite 2 in screw (sku 171.0235) also with EPDM washer is used to crown fasten PVC, Sun-n-Rain and Palruf or Polycarbonate, Suntop and Suntuf, corrugated panels in a roofing application.
|
Midwest Products Wood Strip, Nominal Thickness: 1/8 in, Nominal Width: 1/8 in, Nominal Length: 24 in
|
Pre-drilled to ensure accurate attachment of the railing to the post. Connectors can be used on both railing and composite materials. Includes stainless steel screws. Use for attaching actual 1-1/2 x 3-1/2 in rails.
|
|
|
|
|
|
|
|
|
|
|
|
|
Appearance-grade, white pine. MCA treatment, above ground contact.
|
Appearance-grade, white pine. MCA treatment, above ground contact.
|
Appearance-grade, white pine. MCA treatment, above ground contact. Accommodates 4 x 4 in post.
|
|
|
|
|
|
|
|
|
|
|
|
|
Appearance-grade, white pine. MCA treatment, above ground contact.
|
Appearance-grade, white pine. MCA treatment, above ground contact.
|
Sanded on four sides.
|
|
|
|
|
|
|
|
|
|
|
|
|
Comes with stainless steel screws and will install ten classic balusters. Allows classic balusters to be secured to the rail without drilling. Can be used on both wood and composite railings. ACQ and CA compliant.
|
Fasade inside corner trim pieces allow you to finish the corners of panels in a matching finish. The trims are easy to install and add a professional touch to any project. Simply cut with scissors or utility knife.
|
Appearance-grade, white pine. MCA treatment, above ground contact.
|
|