|
|
|
|
|
|
|
|
|
|
|
|
|
|
Open in the 6 in trim family for use in recessed downlighting. Compatible for use in Halo and other housings.
|
Open recessed trim ring, 7-1/4" OD, for use with 6" housings: Halo model numbers (Orgill SKU numbers): H7T (284.2474), H7RT (942.0381) and SHALLOW H27T (989.1672). Sleeved.
|
Open trim with socket support in the 6 in trim family for use in recessed downlighting. Compatible for use in Halo and other housings.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
"For use with 120 volt Incandescent lamps. Aluminum construction for greater heat dissipation. For installations where housing will be in direct contact with ceiling insulation. Integral thermal protector guards against misuse of insulation materials and improper lamping. Adjustable socket bracket assures proper and consistent lamp positing. Junction box is listed for through branch circuit wiring and has seven 1/2"" knockouts. Slide-N-Slide connectors allow non-metallic sheathed cable to be installed without removing knockouts. Pre-installed captive bar hangers allow housing to be positioned at any point within a 24"" joist span. Can be field shortened for 12"" joist. Installation: 7-1/2"" height allows use in 2 x 8 joist construction. Housing accommodates ceilings up to 2"" thick. Requires 6-1/2"" ceiling opening. Listings: UL Damp Locations. UL Feed Through. UL Listed for direct contact with insulation. CSA Certified. IP Rated."
|
White trim ring with phenolic baffle, 7-1/4" OD, for use with 6" housings: Halo model numbers (Orgill SKU numbers), H7T (540.1815) and H7RT (942.0381).
|
The H7 family of recessed housings are the standard in the industry for both commercial and residential applications. The wide variety of trims available allows a number of different lighting effects to be created with one basic housing. The H7RICT is designed for installations where the housing will be in direct contact with insulation. H7RICT may be converted into Air-Tite? installation when used with Air-Tite? trims.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Air-Tite? baffle trim with reflector 6 in trim family for use in recessed downlighting. Compatible for use in Halo and other housings.
|
Coilex? baffle trim in the 6 in trim family for use in recessed downlighting. Compatible for use in Halo and other housings.
|
The H7 recessed housing is the standard in the industry for both commercial and residential applications. The wide variety of trims available allows a number of different lighting effects to be created with one basic housing. H7ICAT is for installations where the housing will be in direct contact with insulation and also meet restricted air flow requirements.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Wet location and AIR-TITE listed white trim with frosted Albalite Lens. 8" OD, for use with 6" housings: Halo model numbers (Orgill SKU numbers): H7T (284.2474), H7RT (942.0381), and SHALLOW H27T (989.1672). Sleeved.
|
Ideal as an energy-saving retrofit solution, but also suitable for new construction and remodeling installations, the LT4 is an LED baffle trim module for use in 4 in aperture recessed downlights. The downlight is UL certified for use with HALO and other compatible housings and the precision construction makes any housing airtight for added HVAC savings and code compliance. A wide distribution makes the LT4 ideal for general and task lighting.
|
The H750RICAT is a dedicated LED Remodel housing for use with Halo H7 Collection 600 900 Series LED modules. The H750RICAT is designed for remodel into insulated ceilings and can be in direct contact with ceiling insulation. This AIR-TITE? housing design prevents airflow between attic and living areas and saves on both heating and air conditioning costs. The H750RICAT LED connector system provides high efficiency code compliance when used with Halo H7 Collection 600 and 900 Series LED modules.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Eyeball 30 deg tilt, self-flanged in the 6 in trim family for use in recessed downlighting. Compatible for use in Halo and other housings.
|
The H99TAT is a small aperture Non-IC AIR-TITE? housing for providing accent and task lighting. The H99TAT is designed for use in non-insulated ceiling or for insulated ceilings but insulation must be kept 3 in from all sides of the housing. Non-IC Housing is AIR-TITE? but insulation must be kept 3 in away from all sides of housing.
|
Coilex? baffle trim for 4 in H99 incandescent family and H470 CFL family of recessed housings. Die-cast trim ring is available in a variety of finishes. Polymer Coilex? baffle is available in white and black. Three cat's paw springs secure trim in housing.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
LED surface mount downlight. Dimmable, showerlight. Fits most J-boxes and recessed housings. 3000K, 50000 average life hours.
|
Halo BLD6 Recessed Lighting Trim, Lumens: 800 Lumens, Recessed Can Diameter: 6 in, White, Temperature Rating: 3000 K, Includes: Torsion Spring
|
Reflector cone in the 6 in trim family for use in recessed downlighting. Compatible for use in Halo and other housings.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
ETI Edge-Lit Downlight, 120 V, 8.5 W Wattage, Dimmable, Triac Ballast, 50,000 hr Average Life, 450 Lumens , 2700, 3000, 4000, 5000 K Color Temperature, Recessed Can Diameter: 3 in, Dimmable , -13 to 104 deg F
|
The H7 family of recessed housings are the standard in the industry for both commercial and residential applications. The wide variety of trims available allows a number of different lighting effects to be created with one basic housing. The H7RICAT housing is designed for installations where the housing will be in direct contact with insulation and also meet restricted air flow requirements.
|
ETI Edge-Lit Downlight, 120 V, 11 W Wattage, Dimmable, Triac Ballast, 50,000 hr Average Life, 650 Lumens , 2700, 3000, 4000, 5000 K Color Temperature, Recessed Can Diameter: 4 in, Dimmable , -13 to 104 deg F
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
The H99RTAT is a small aperture Non-IC AIR-TITE? housing for providing accent and task lighting. The H99RTAT is designed for use in non-insulated existing ceilings. Non-IC Housing is AIR-TITE? but insulation must be kept 3 in away from all sides of housing. For installation from below the ceiling.
|
A complete ultra-thin direct mount down light that chooses the color temperature directly on the fixture. Choose between 5 color temperatures ranging from warm (2700 K) to daylight (5000 K) prior to installing in ceiling. For use in new construction, remodel and retrofit installation, without needing a housing or j-box. LED driver offers 120 volt dimming capability. The HLB4 lens provides uniform illumination in wet location listing. HALO matte white finish with textured lens to provide smooth light distribution. Fixture is built to last with maintenance-free energy efficient LEDs with 50,000 hours of light. IC rated, for direct contact with insulation. Airtight, wet rated, can be used in shower and outdoor light applications. 1/2" depth for use in shallow ceilings. Fits into applications with as little as 3.5" plenum clearance.
|
Direct mount. Does not require recessed housing or junction box. Delivers up to 1,100 lumens. 2700, 3000, 3500, 4000 and 5000 K field selectable CCT. 6" ultra-thin LED lens down light with remote driver. Wet location listed for showers and protected ceilings. Dimmable with 120 volt dimmers.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
ETI Edge-Lit Downlight, 120 V, 15 W Wattage, Dimmable, Triac Ballast, 50,000 hr Average Life, 900 Lumens , 2700, 3000, 4000, 5000 K Color Temperature, Recessed Can Diameter: 6 in, Dimmable , -13 to 104 deg F
|
Trim ring with phenolic baffle, 7-1/4 in OD, for use with 6 in housings, white trim with white baffle, for slope ceiling. Halo model number SLOPE H645IC, Orgill Sku number 140.7022. Sleeved.
|
Halo BLD4 Downlight, 120 V, 0.087 A, Wattage Rating: 10 W, Trim Type: Surface Mount, Lamp Base: E26 Edison Screw, Lamp Type: LED, Surface Mounting, Ceiling Type: Recessed, Average Life: 50000 hr, Lumens: 800 Lumens, Color Temperature: 2700, 3000, 3500, 4000, 5000 K, Color Rendering Index (CRI): 90, Aluminum, Bright White/Daylight/Neutral White/Soft White/Warm White, Dimensions: 6-3/16 in Dia x 7/8 in H
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
The H99ICAT is a small aperture IC AIR-TITE? housing for accent and task lighting. It is designed for use in insulated ceilings where it will be in direct contact with insulation. It is an AIR-TITE? housing designed to prevent air flow between living spaces and unconditioned areas.
|
The Halo RL6 direct-mount is a SeleCCTable? complete LED baffle-trim module for 6 in aperture applications, all without the need for a recessed housing, suitable for new construction, remodel and retrofit installation. Using the CCT selectable switch users can chose between five different color temperatures. The RL family offers a regressed lens that provides uniform illumination and wet location listing. Precision construction makes this product AIR-TITE for added savings and code compliance.
|
The Halo RL4 deep baffle is a complete LED baffle-trim module for 4 in aperture recessed downlights suitable for new construction, remodel and retrofit installation. The regressed lens provides uniform illumination and 50 deg optical cutoff. The deep baffle comes standard with both white and black Coilex baffle insters and is wet location. Precision construction makes any housing AIR-TITE for added savings and code compliance.
|
|
|
