Home > PLUMBING > KITCHEN & BATH > DRAIN & SUPPLY
Choose a sub category:
SUPPLY LINES SUPPLYADAPTERS & CONNECTORS ICEMAKER SUPPLY LINES
TUBULAR DRAIN - PLASTIC TUBULAR DRAIN - METAL FLOOR DRAINS AND TRAPS
POP-UP ASSEMBLY / PARTS
Sort By:
1 2 3 ... 11
Plumb Pak PP20955 Slip Joint Nut Plumb Pak PP20552 Extension Tube Plumb Pak PP20999 Drain Pipe Adapter
Plumb Pak Slip-Joint Nut, Specifications: 1-1/2 x 1-1/2 in, PVC, White Plumb Pak Pipe Extension Tube, Nominal Size: 1-1/2 in, Slip-Joint Connection, PVC, White, 6 in L Plumb Pak Marvel Pipe Connector, Nominal Size: 1-1/2 in, Compression Connection, Schedule Rating: SCH 40, Plastic, White, Suitable for: Drainage System
TAILPIECE FLANGE 1-1/2ODX4 WHT Plumb Pak PP20944 Extension Tube Plumb Pak PP20554 Sink Drain Coupling
The Danco flanged tailpiece is designed for use in tubular sink drain applications. It is constructed from durable plastic that will endure the rigors of everyday use. The direct connection makes it easy and quick to install. Plumb Pak Pipe Extension Tube, Nominal Size: 1-1/4 in, Slip-Joint Connection, PVC, White, 6 in L With 1-1/2 x 1-1/4 in reducing washers.
TAILPIECE FLANGE 1-1/2ODX6 WHT Oatey 43560 Snap-In Drain Worldwide Sourcing DWC-100 Dishwasher Connector
The Danco flanged tailpiece is designed for use in tubular sink drain applications. It is constructed from durable plastic that will endure the rigors of everyday use. The direct connection makes it easy and quick to install. Oatey? all plastic snap-in drain designed for drainage in areas that don't require a waterproofing membrane. Connects dishwasher drain hose to sink drain or to a garbage disposal. Made of flexible PVC.
ROD CLIP POP-UP BATHROOM      TUBE EXTEN SLIP 1-1/2X6IN WHT Oatey 42757 Condensate P-Trap
Installing new clips will restore function to old drain assemblies. It is an easy alternative to replacing the bathroom sink drain assembly. Clevis clips help connect the pull rod and stopper allowing for stopper to open and close. These clips are designed to be used on lift type drains or pop-up drain assemblies. The Danco slip-joint extension tube is designed for use in tubular sink drain applications. It is constructed from durable plastic that will endure the rigors of everyday use. This tube extends 8 in for additional reach for drain connections. Oatey Condensate Traps offer a one-piece design made of 3/4 in PVC SCH 40 DWV pipe.
Plumb Pak PP20945 Extension Tube TRAP ADAPTER 1-1/2IN WHITE    TEE CENTER OUTLET 1-1/2IN WHT
Plumb Pak Pipe Extension Tube, Nominal Size: 1-1/4 in, Slip-Joint Connection, PVC, White, 12 in L The Danco trap adapter is designed for use in tubular sink drain applications. It is constructed from durable plastic that will endure the rigors of everyday use. The slip-joint connection makes it easy and quick to install. The Danco center outlet tee is designed for use in tubular sink drain applications. It is constructed from durable plastic that will endure the rigors of everyday use. The slip-joint connection makes it easy and quick to install.
P-TRAP SLIP JOINT 1-1/2IN WHT TAILPIECE FLANG 1-1/2ODX12 WHT Plumb Pak PP20905 Sink Tailpiece
Replace your sink drain components with this Danco p-trap. The p-trap holds water in the U- or J-shaped bend to provide a liquid seal between the home and sewer gasses. Water drains through the pipe to the sewer system while maintaining the proper seal. The Danco flanged tailpiece is designed for use in tubular sink drain applications. It is constructed from durable plastic that will endure the rigors of everyday use. The direct connection makes it easy and quick to install. Plumb Pak Sink Tailpiece, Nominal Size: 1-1/2 in, PVC, White, 6 in L
Oatey 42758 Condensate Running Trap WALL BEND PLASTIC 1-1/4X8 WHT Plumb Pak PP20946 J-Bend
Oatey Condensate Traps offer a one-piece design made of 3/4 in PVC SCH 40 DWV pipe. The Danco wall bend is designed for use in tubular sink drain applications. It is constructed from durable plastic that will endure the rigors of everyday use. The direct connection makes it easy and quick to install. For P or S traps.
Plumb Pak PP20558 Reducer Coupling Plumb Pak PP905W Sink Tailpiece TUBE ELBOW 1-1/2IN 90DEG WHT
1-1/2 in slip joint x 1-1/4 in connection. Plumb Pak Sink Tailpiece, Nominal Size: 1-1/2 in, PVC, White, 6 in L The Danco slip-joint elbow is designed for use in tubular sink drain applications. The sink trap is durable plastic that will endure the rigors of everyday use. The slip-joint connection makes it easy and quick to install.
Oatey 42021 Replacement Round Snap-Tite Strainer Plumb Pak PP20555 Sink Drain Pipe Elbow With Reducing Washer WALL TUBE PLASTC 1-1/2X7-3/4IN
6-3/4 in white plastic replacement strainer. Screws included. Carded. Plumb Pak Sink Drain Pipe Elbow, Nominal Size: 1-1/2 in, Angle: 90 deg, PVC, White, Suitable for: Drainage System, Includes: Reducing Washer The Danco wall tube is designed for use in tubular sink drain applications. It is constructed from durable plastic that will endure the rigors of everyday use. The tube features a quarter bend configurations.
Plumb Pak PP20661 J-Bend J-BEND TRAP SLIP 1-1/2IN WHIT Plumb Pak PP66-13W Wall Tube
For P or S traps. For kitchen and bathroom sink drains. 1-1/2 in or 1-1/4 in inlet. Plumb Pak Wall Tube, Nominal Size: 1-1/2 in, Slip-Joint Connection, Plastic, White, 7 in L, Suitable for: P-Trap
   
 
1 2 3 ... 11