|
|
|
|
|
|
|
|
|
|
|
|
|
|
Designed to be used with a 3/4 in Dia supply connector to seal the connection. Size of 13/16 x 1 in.
|
Water heater supply line washer.
|
The CAMCO flared dip tube is a non-metallic tube that directs incoming cold water to the bottom of the tank and can be cut to length.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
CAMCO 11523 3/4 in plastic water heater drain valve features an all plastic valve that fits directly into water heater for easy draining. 3/4 in pipe thread x 3/4 in male hose thread.
|
The CAMCO side mount run-off tube carries water steams safely to the drain pan or drain, if T and P valve activates. Thermoplastic polypropylene run-off tubes present a rigid surface for gripping with standard wrenches and can be cut to length.
|
The 2-1/2 in dielectric nipple is designed for use in water heater inlet and outlet hook-ups and for other uses where dissimilar metals occur in piping and plumbing systems. The thermoplastic lining helps prevent corrosion and the ends are 3/4 in NPT tapered pipe thread for a fluid-tight seal. Dielectric nipple measures 2-1/2 in Length and is sold in a convenient 2-pack.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Connector with nickel plated brass nuts and nitrile rubber sealing washer. Complies with no-lead laws. 3/4 in FIP x 3/4 in FIP.
|
Connector with nickel plated brass nuts and nitrile rubber sealing washer. Complies with no-lead laws. 3/4 in FIP x 3/4 in FIP.
|
CAMCO RV 1500 W universal element is designed to replace the heating element in your RV water heater. This UL recognized HWD replacement kit has a screw-in style flange. Gasket and complete instructions are included.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Rated for 250 psi at 180 deg F. Threaded ends comply with ANSI B1.20.1. Solder ends comply to ANSI 16.18.
|
Rated for 250 psi at 180 deg F. Threaded ends comply with ANSI B1.20.1. Solder ends comply to ANSI 16.18.
|
Connector with nickel plated brass nuts and nitrile rubber sealing washer. Complies with no-lead laws. Dimension of 3/4 in FIP x 3/4 in FIP.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
UL listed. Gasket included. 208V 3500W or 240V 4500W
|
For electric water heaters only. Heavy-duty polypropylene. Dual size 1 to 1-1/2 in PVC drain fitting with gaskets included. Sides are 2-1/2 in deep. Pre-cut side opening for drain fitting.
|
Contains (1) 2-1/2 in 4-bolt, (1) screw-in gasket adapt-a-flange, (1) thermostat bracket, (1) four hole gasket and (4) 5/16 in to [no. 18] 5/8 in hex bolt-washers. Use a standard screw-in element to replace a flat, universal or round flange element using the element conversion kit.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
1-1/4 in shank length. Heavy brass construction. Neoprene seal disc. 3/4 in hose threaded outlet. Plated steel canopy handle. Pipe threads comply with ANSI B1.20.01. Hose threads comply with ANSI B1.20.7.
|
UL listed. Gasket included.
|
CAMCO RV 1500 W universal element is designed to replace the heating element in your RV water heater. This UL recognized HWD replacement kit has a universal style flange. Gasket and complete instructions are included.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
UL listed. Gasket included.
|
UL listed. Gasket included.
|
Apollo Valves ExpansionPEX Water Heater Connector, Nominal Size: 3/4 in, Barb x FPT Connection, Stainless Steel, 25 mm Dia, 18 in L
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
UL listed. Gasket included.
|
UL listed. Gasket included.
|
Rated for 250 psi at 180 deg F. Threaded ends comply with ANSI B1.20.1. Solder ends comply to ANSI 16.18.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
BrassCraft Copper-Flex??? 3/4 in female iron pipe inlet x 3/4 in female iron pipe outlet water heater connectors. Used to connect the water supply to your water heater, this connector features an integrated dielectric sleeve, the sleeve isolates dissimilar metals within the waterway, where galvanic and electrolytic corrosion have their greatest potential. This separation provides complete protection against galvanic corrosion that can deteriorate the connector and cause leaks.
|
For electric water heaters only. Heavy-duty polypropylene. Dual size 1 to 1-1/2 in PVC drain fitting with gaskets included. Sides are 2-1/2 in deep. Pre-cut side opening for drain fitting.
|
High watt density elements, (150 plus W/sq-in). Gasket and detailed instructions included. Voltage rating of 240 V. UL listed.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
UL listed. Meets original specifications length for Rheem, Ruud, Richmond, A.O Smith, American and GSW. Energy efficient range setting, built-in safety switch to prevent overheating.
|
For electric water heaters only. Heavy-duty polypropylene. Dual size 1 to 1-1/2 in PVC drain fitting with gaskets included. Sides are 2-1/2 in deep. Pre-cut side opening for drain fitting.
|
UL listed. Gasket included.
|
|
|
