Home > PLUMBING > ROUGH PLUMBING SUPPLIES > GAS SUPPLY LINES > FLEXIBLE GAS PIPING SYSTEM
Choose a sub category:
CORRUGATED SS TUBING-PROFLEX BRASS FITTINGS/ACCESSO-PROFLEX
Sort By:
1
Pro-Flex PFIM-0001 Pro-Flex Installation/Training Guide Pro-Flex PFSP-0307 Pro-Flex Striker Plate Pro-Flex Floppy-Flex Protective Conduit
Pro-Flex Installation/Training Guide, Title: CSST Protective devices required where tubing passes through structural members. Pro-Flex Floppy-Flex Protective Conduit, Trade Size: 1-1/4 in, Aluminum, Galvanized, 12 in L, Operating Temperature: 32 to 200 deg F, Suitable for: 3/4 in CCST Tubing
Pro-Flex PFAP-3410 Pro-Flex Accessory Pack Pro-Flex PFAP-1210 Pro-Flex Accessory Pack Pro-Flex PFBC-AB Pro-Flex Bonding Clamps
Pro-Flex Accessory Pack, Specifications: 3/4 in Dia CSST, Suitable for: Pro-Flex CSST Flexible Gas Piping System, Includes: (4) Retainer Rings, (2) Slide Rings, Silicone O-Rings and High Temperature Sealing Gaskets Pro-Flex Accessory Pack, Specifications: 3/8 in Dia CSST, Suitable for: Pro-Flex CSST Flexible Gas Piping System, Includes: (4) Retainer Rings, (2) Slide Rings, Silicone O-Rings and High Temperature Sealing Gaskets UL467 bronze bonding clamp. Bonding of the gas system is required with all installations of Pro-Flex CSST.
Pro-Flex PFMF-1212 Tube To Pipe Adapter Pro-Flex PFFN-1212 Tube To Pipe Adapter Pro-Flex PFMF-3406 Tube To Pipe Adapter
Includes all components (Retainer ring, slide ring, O-ring and high-temperature gasket) required to assemble to Pro-Flex tubing. Includes all components (Retainer ring, slide ring, O-ring and high-temperature gasket) required to assemble to Pro-Flex tubing. Includes all components (Retainer ring, slide ring, O-ring and high-temperature gasket) required to assemble to Pro-Flex tubing.
Pro-Flex PFFN-3406 Tube To Pipe Adapter Pro-Flex PFST-12 Pro-Flex Termination Plates Pro-Flex PFMN-CCB 4-Port Pipe Manifold
Includes all components (Retainer ring, slide ring, O-ring and high-temperature gasket) required to assemble to Pro-Flex tubing. Includes attached fitting complete with all components (Retainer ring, slide ring, O-ring and high temperature gasket) required to assemble to Pro-Flex tubing. Pro-Flex Manifold, Number of Outlets: 4, Inlet Connection Size: 3/4 in, Inlet Connection Type: FNPT, Outlet Connection Size: 1/2 in, Outlet Connection Type: FNPT, Metal
Pro-Flex PFMN-BBB 4-Port Pipe Manifold Pro-Flex PFST-34 Pro-Flex Termination Plates Pro-Flex PFBC-CDEA Pro-Flex Bonding Clamps
Pro-Flex Manifold, Number of Outlets: 4, Inlet Connection Size: 1/2 in, Inlet Connection Type: 1/2 in, Outlet Connection Type: FNPT Includes attached fitting complete with all components (Retainer ring, slide ring, O-ring and high temperature gasket) required to assemble to Pro-Flex tubing. UL467 bronze bonding clamp. Bonding of the gas system is required with all installations of Pro-Flex CSST.
Pro-Flex PFTE-BBB6 Tube Tee Pro-Flex PFTE-CCB6 Tube Tee Pro-Flex PFCT-1225 Pro-Flex
Includes all components (retainer ring, slide ring, O-ring and high-temperature gasket) required to assemble each branch to Pro-Flex tubing. Includes all components (retainer ring, slide ring, O-ring and high-temperature gasket) required to assemble each branch to Pro-Flex tubing. Flexible 304 stainless steel with yellow polyethylene jacketing. All tubing clearly marked with gas pressure rating, EHD (Equivalent Hydraulic Diameter). Tested to the ANSI Standards for Fuel Gas Piping System using Corrugated Stainless Steel Tubing(CSST), ANSI LC-1a-2009, CSA 6.26a-2009, ANSI LC-1-2005 and CSA 6.26-2005.
Pro-Flex PFCT-3425 Pro-Flex Pro-Flex PFSAGK-2000 Pro-Flex Gas Appliance Kit Pro-Flex PFCT-1275 Pro-Flex
Flexible 304 stainless steel with yellow polyethylene jacketing. All tubing clearly marked with gas pressure rating, EHD (Equivalent Hydraulic Diameter). Tested to the ANSI Standards for Fuel Gas Piping System using Corrugated Stainless Steel Tubing(CSST), ANSI LC-1a-2009, CSA 6.26a-2009, ANSI LC-1-2005 and CSA 6.26-2005. The Pro-Flex Single Appliance Kit is provides everything needed for hooking up gas to one appliance such as a traditional water heater, gas fireplace, gas logs, gas dryer or many other appliances. Flexible 304 stainless steel with yellow polyethylene jacketing. All tubing clearly marked with gas pressure rating, EHD (Equivalent Hydraulic Diameter). Tested to the ANSI Standards for Fuel Gas Piping System using Corrugated Stainless Steel Tubing(CSST), ANSI LC-1a-2009, CSA 6.26a-2009, ANSI LC-1-2005 and CSA 6.26-2005.
Pro-Flex PFCT-3475 Pro-Flex Pro-Flex PFCT-12225 Pro-Flex Pro-Flex PFCT-34225 Pro-Flex
Flexible 304 stainless steel with yellow polyethylene jacketing. All tubing clearly marked with gas pressure rating, EHD (Equivalent Hydraulic Diameter). Tested to the ANSI standards for fuel gas piping system using corrugated stainless steel tubing (CSST), ANSI LC-1a-2009, CSA 6.26a-2009, ANSI LC-1-2005 and CSA 6.26-2005. Flexible 304 stainless steel with yellow polyethylene jacketing. All tubing clearly marked with gas pressure rating, EHD (Equivalent Hydraulic Diameter). Tested to the ANSI standards for fuel gas piping system using corrugated stainless steel tubing (CSST), ANSI LC-1a-2009, CSA 6.26a-2009, ANSI LC-1-2005 and CSA 6.26-2005. Flexible 304 stainless steel with yellow polyethylene jacketing. All tubing clearly marked with gas pressure rating, EHD (Equivalent Hydraulic Diameter). Tested to the ANSI standards for fuel gas piping system using corrugated stainless steel tubing (CSST), ANSI LC-1a-2009, CSA 6.26a-2009, ANSI LC-1-2005 and CSA 6.26-2005.
   
 
1