|
|
|
|
|
|
|
|
|
|
|
|
|
|
Small screw-in insulator.
|
With Zareba? black 4 ft step-in fence posts, quickly set up fencing in any outdoor area. Set up your fence perimeter by installing these fence posts and then run your fence line between them. While Zareba? designed these posts with electric fencing in mind, they can also be used for setting up perimeters for crowd control, construction zones and property marking. They can even hold decorations or serve as vegetable or plant stakes.
|
For a secure connection between ground wire and ground rod. Heavy-duty construction. Made of aluminum. Will not rust. For use with 5/8 in and larger ground rods. 1 clamp/Pack.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Molded of tough, high quality plastic with shockproof thickness for safe handling protection.
|
Connects 1 in polytape to the end insulators to reach all of your fence posts.
|
Our Zareba? large ceramic lag screw insulators are used to attach electrified wire to wood posts without losing energy through the post. These ceramic insulators can be used with all fence wire, including high tensile, as well as poly rope and poly tape.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Allows you to connect one polyrope to another to reach all of your fence posts.
|
With Zareba? white 4 ft step-in fence posts, quickly set up fencing in any outdoor area. Set up your fence perimeter by installing these fence posts and then run your fence line between them. While Zareba? designed these posts with electric fencing in mind, they can also be used for setting up perimeters for crowd control, construction zones and property marking. They can even hold decorations or serve as vegetable or plant stakes.
|
Unique step-in design with adjustable insulators that can be used with BayGard wire, Bayshock? wire or BayGard HV "High Visibility" tape. Excellent performance.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Corner posts need these extra tough electric fence insulators that can withstand the strain of the wire. The Zareba? yellow corner post insulator is formed of thick, tough plastic that can withstand the strain of wire on your electrified fences. These yellow electric fence insulators are packed 10 per bag.
|
Our Zareba? high-tensile, three-hole twisting tool is an essential tool for bending or twisting high tensile wire, poly spacer clips or for twisting T-post or spacer clips to fasten wire on to posts. Use with up to 8 ga wire.
|
Self-drilling, screw-in electric fence insulator that can be used with any type of wire, including high tensile. Made of sturdy plastic. Easy to install.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
When planning your fence, there are several things you should consider. Among these things are placement of the gate and the type of gate handle to use. Your electric fence gate, if possible, should be placed at corners instead of in the middle of the fence. This extremely sturdy Fi-Shock? rubber gate handle is virtually indestructible and will not crack in cold weather.
|
Ridged design enables the staple to lock without penetrating insulator profile. Made of non-conductive polyethylene.
|
For connecting a fence charger to polytape. This clamp connects the fence charger connects the fence charger to polytape anywhere in the fence line where an electrical connector plate is inaccessible. Connects the polytape to the energizer.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Used to tighten high-tensile wire. Under compression, it automatically feeds into cog reel.
|
Connects 2 in polytape to the end insulators to reach all of your fence posts.
|
Breaking load limit of 125 to 145.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Our Zareba? wood post polytape corner insulator is molded of heavy-duty white polyethylene with UV inhibitors. This white insulator is for use at corners, ends or T-junctions.
|
Use Zareba? 5 in galvanized brace pins to attach horizontal brace posts to upright brace posts in corner and brace post assemblies. These 5 in brace pins are to be used in anchor posts. They fit 3/8 in hole for easy installation and they're class III galvanized for rust resistance and long life.
|
Stainless steel spring clip for 3/8 in and 1/2 in fiberglass rod posts. Will not rust or corrode. Safely and securely attach electrified wire or poly wire to fiberglass or rod posts. 20 clips/Bag.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Add visibility to your electric fence with these Zareba? electric fence warning signs. These signs make people aware of the electrified fence. Low cost and easy to install. Many county laws require electric fence warning signs every 250 ft.
|
Our Zareba? yellow standard snug-fitting T-post insulator fits securely on standard (1-1/4 in or 1.33 in) studded T-posts. Created as one molded piece, this insulator - needs no hardware.
|
Corner insulator and tensioner for standard T-posts (1.25 and 1.33 posts). For all polytape widths up to 2 in. Use at corners, ends or T junctions. Fully insulated. Molded of white high-density polythylene with UV inhibitors. Prevents electrical shorts between the electrified wire and the fence posts.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Our Zareba? electric fence tester has a light that indicates the current flow through fence wire. It's molded of high-impact ABS. Have peace of mind knowing your fence wire current is flowing properly, securing your livestock and other animals.
|
For fastening electrified wire to wood posts without losing energy through the post. Economical insulator with double headed nail. For 9 to 22 ga high-tensile steel wire and aluminum, all polywire (both regular and heavy-duty) and polyrope of diameter up to 1/4 in. Yellow color. 25/Bag.
|
For connecting strands of polytape. Simplifies electrical connections between strands of polytape. Stainless steel plate holds the tape securely and will not corrode.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Our Zareba? yellow snap-on 2 in extender T-post insulator fits securely on standard (1-1/4 in or 1.33 in) studded T-posts. It is fabricated as one molded piece, so it needs no hardware.
|
Our Zareba? electric fence wire tap electrically connects one fence wire to the next or hooks up wire to fence wire. It fits 12-1/2 to 16 ga wire. Crimping tool required; crimp twice for a secure connection.
|
Use our Zareba? 10 in galvanized brace pins to attach horizontal brace posts to upright brace posts in corner and brace post assemblies. These 10 in brace pins are to be used in vertical brace posts. They fit 3/8 in hole for easy installation and they're class III galvanized for rust resistance and long life.
|
|
|
