|
|
|
|
|
|
|
|
|
|
|
|
|
|
"Slotting cutter arbors will work with any slotting cutter with a 5/16"" arbor. Use on hand held and table mounted portable routers."
|
Slotting cutter arbors will work with any slotting cutter with a 5/16 in arbor. Use on hand held and table mounted portable routers.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Premium-quality micro grain carbide tips are ground on specialized CNC equipment for an extra-fine finish with maximum sharpness and edge retention. For use in cutting slots, the three-wing cutter is used for better cut finish. The fully hardened and tempered steel shank provides ultimate durability.
|
Produce a precision slot for T-moldings, spline joints, or many other applications. Bodies are heat treated for strength and are computer balanced for vibration free operation. Should be used with No. 60-100 slotted cutting arbor. Cuts all composition materials, plywood, hard wood and soft wood.
|
Produce a precision slot for T-moldings, spline joints or many other applications. Bodies are heat treated for strength and are computer balanced for vibration-free operation. Should be used with No. 60-100 slotted cutting arbor. Cuts all composition materials, plywood, hard wood and soft wood.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Should be used with Freud's slotting cutter arbors 60-100 for 1/4 in shanks and 60-102 for these cutters are a fast, efficient way to rout slots and grooves for T-moldings, spline joints, tongue/groove joints and many other applications. Should be used with Freud's slotting cutter arbors 60-100 for 1/4 in shanks, 60-102 for 1/2 in shanks and 62-108 bearing.
|
Produce a precision slot for T-moldings, spline joints or many other applications. Bodies are heat treated for strength and are computer balanced for vibration-free operation. Should be used with No. 60-100 slotted cutting arbor. Cuts all composition materials, plywood, hard wood and soft wood.
|
|
|
|
