Home > POWER TOOLS & ACC > PNEUMATIC TOOLS & ACCESSORIES > PNEUMATIC NAILERS > CORDLESS NAILERS
Sort By:
1
STAPLER NRRW CROWN BA 20V 18GA NAILER BRAD BARE 20V 18GA NAILER BRAD KIT 20V 18GA
Battery powered, tool-free selectable trigger, low nail lockout, bottom load magazine, brushless motor, tool-free depth adjustment. Compatible with all DeWALT? 20 V Max batteries. Compatible with 1 in to 1-1/2 in, 18 Ga 1/4 in narrow crown fasteners. Battery not included. The DeWALT? DCN680 18 ga brad nailer drives 18 ga brad nails from 5/8 to 2-1/8 in which makes it ideal for fastening decorative molding, casing, kitchen crown and shoe molding. With its brushless motor powered by a DeWALT? 20 V Max Lithium-Ion battery the DCN680 is ready to go to work without the hassle of using gas, compressor and hose. Tackle jobs both large and small with the features of a pneumatic tool and the freedom of cordless. Maximum initial battery voltage (measured without a workload) is 20 V. Nominal voltage is 18 V. The DeWALT? DCN680 18 ga brad nailer drives 18 ga brad nails from 5/8 to 2-1/8 in which makes it ideal for fastening decorative molding, casing, kitchen crown and shoe molding. With its brushless motor powered by a DeWALT? 20 V Max Lithium-Ion battery the DCN680 is ready to go to work without the hassle of using gas, compressor and hose. Tackle jobs both large and small with the features of a pneumatic tool and the freedom of cordless. Maximum initial battery voltage (measured without a workload) is 20 V. Nominal voltage is 18 V.
STAPLER NRRW CROWN KT 20V 18GA NAILER ANGL FNSH 20V 15GA BARE NAILER FRM PLST 18V 21-DEG
Eliminates the hassle of using gas, compressor and hose. Multi-functional LED lights help to provide both workspace illumination and tool diagnostics. Adjustable belthook for left or right attachment depending on user preference. Tool-free depth adjustment for precise countersinking of staples. Tool-free selectable trigger for sequential or contact actuation modes. Brush-less motor maximizes run time and durability. Integrated tool-free stall release lever to quickly reset the driver blade in the event of a stall. Compatible with all DeWALT? 20 V max batteries. Included with the narrow crown stapler is one 2 Ah battery, 1 charger and a handy kit bag. The DeWALT? DCN650 15 ga angled finish nailer drives 15 ga angled finish nails from 1-1/4 to 2-1/2 in which makes it ideal for fastening crown molding, casing, baseboards and hardwood floor installation. With its brushless motor powered by a DeWALT? 20 V Max Lithium-Ion battery the DCN650 is ready to go to work without the hassle of using gas, compressor and hose. Tackle jobs both large and small with the features of a pneumatic tool and the freedom of cordless. Maximum initial battery voltage (measured without a workload) is 20 V. Nominal voltage is 18 V. Metabo HPT Strip Framing Nailer, Tool Only/Battery Included: Battery Included, Battery Voltage: 18 V, Battery Capacity: 3 Ah, Magazine Capacity: 47, Collation Angle: 21 deg, Collation Type: Plastic, Fastener Type: Nail, Fastener Size: 2 to 3-1/5 in L, Includes: Case, Charger and Battery, Battery Type: Lithium-Ion
NAILER FRMG PT 18V 30-DEG NAILER PLST COLLATED 21DEG 20V NAILER ANGLED FINISH 20V 15GA
The NR1890DC 18 V cordless paper strip framing nailer completely raises the bar for cordless framing nailers. It is designed so you no longer need the dirty hoses, loud compressors or expensive gas cartridges. It's equipped with Metabo HPT HPT's unique air spring drive system that delivers similar performance as a pneumatic nailer, but offers total cordless freedom. It uses sealed compressed air to drive each nail, which results in zero ramp up time, up to two nails driven per second, recoil that feels like a pneumatic nailer and best of all, there is no refilling of the air tank required. This cordless nailer is ideal for all construction framing applications but is particularly useful for punch-out work on a jobsite for quick in-and-out operation with minimal hassle and professional results. The 20 V MAX 21 deg plastic collated cordless framing nailer delivers the performance demanded by pros to get the job done. The DCN21PL can drive a range of plastic collated fasteners up to 3-1/4 in and 0.148 in Dia into a wide range of materials. Its compact shape, well balanced design and easy-to-operate features make it a highly productive tool capable of getting the job done quickly and efficiently. 100% battery power means you can show up and start working without wasting time setting up a compressor or spending money on costly fuel cell replacements. The DeWALT? DCN650 15 ga angled finish nailer drives 15 ga angled finish nails from 1-1/4 to 2-1/2 in which makes it ideal for fastening crown molding, casing, baseboards and hardwood floor installation. With its brushless motor powered by a DeWALT? 20 V Max Lithium-Ion battery the DCN650 is ready to go to work without the hassle of using gas, compressor and hose. Tackle jobs both large and small with the features of a pneumatic tool and the freedom of cordless. Maximum initial battery voltage (measured without a workload) is 20 V. Nominal voltage is 18 V.
NAILER FINISH ANGLED 16GA 20V Senco 6E0001N Cordless Fusion Nailer NAILER FRAMING CRDLS 21DEG 20V
NAILER BRAD 18GA 2-1/8IN
Our Price: $449.40
The DeWALT? DCN660 16 ga angled finish nailer drives 16 ga angled finish nails from 1-1/4 to 2-1/2 in which makes it ideal for fastening crown molding, casing and baseboards. With its brushless motor powered by a DeWALT? 20 V Max Lithium-Ion battery the DCN660 is ready to go to work without the hassle of using gas, compressor and hose. Tackle jobs both large and small with the features of a pneumatic tool and the freedom of cordless. Maximum initial battery voltage (measured without a workload) is 20 V. Nominal voltage is 18 V. Experience award winning cordless convenience in an all-day, everyday cordless pneumatic trim tool. Features instant shot performance with no ramp up time. No hose or air compressor to drag around. Never buy fuel cells again. Thumbwheel depth-of-drive adjustment. Specs: selectable actuation trigger firing mode, one Li-ion 18v, 80-percent in 15 minutes, 100-percent in 45 minutes, 110 fastener capacity, 13" H x 11" L x 3" W, 5/8 - 2-1/8" fastener range, galvanized finish, straight glued strip collation and weighs 6 lbs. Includes: (1) 18 volt Li-Ion battery, (1) charger and (1) storage bag. The 20V MAX* 21deg plastic collated cordless framing nailer delivers the performance demanded by pros to get the job done. The DCN21PL can drive a range of plastic collated fasteners up to 3-1/4 in and 0.148 in Dia into a wide range of materials. Its compact shape, well balanced design and easy-to-operate features make it a highly productive tool capable of getting the job done quickly and efficiently. 100% battery power means you can show up and start working without wasting time setting up a compressor or spending money on costly fuel cell replacements.
   
 
1